Climadoor
0
Search Icon
Close

Our Products

More Information

Quality Internal & External Doors Delivered To Your Door

Email us: sales@climadoor.co.uk    Need Help? Call us on: 0203 846 0345

Search Icon

Your Basket

0 Items  £ 0.00

0

How To Install Exterior French Doors

If, having given serious consideration to all the above points, you’ve decided to go ahead with this exciting home improvement project, then here is a step by step guide to fitting your exterior French doors.

Tools Required:

  • Carpenter’s square
  • Power drill
  • Phillips-head screwdriver
  • Flat-head screwdriver
  • Hole cutter
  • Pry bar
  • Flush cutting saw
  • Rubber mallet
  • Paddle bit
  • Hammer
  • Standard drill bit
  • Long level
  • Utility knife
  • Safety glasses
  • Nail punch
  • Tape measure
  • Chisel

Check exactly what is provided in your French door kit. Some include all the fixings and things like door furniture, whereas others may provide only the basic doors and frame. Most French door kits should also provide comprehensive fitting instructions which you should read carefully before attempting to install your doors, ensuring that you have any additional materials suggested.

Once delivered, store your French doors in a flat position, and not on an edge or an end. They should be on a level surface and kept clear of the floor on at least three level bearers.

Step One – How To Measure Your Opening

It is the brick opening that you need to measure, not the old doors and frame. Measure brick to brick in three places for the width – at the top of the opening, in the middle, and at the bottom. Then measure in three places for the height – near the left side, in the middle and near the right side. Remember to take each measurement twice and get someone to help you hold the tape measure straight and taut. Use the smallest measurement in each case.

When deciding which size of French doors to buy, deduct 10mm from your final height and width measurements to allow for accurate plumb and square fitting into the aperture. Spacers and filler can then be used to secure the frame into place and fill any gaps.

Check that your brick opening is not a helix. The opening needs to be both straight and plumb in both directions, otherwise the two doors will not be even at the bottom when closed. Use two pieces of string to check this, attaching one piece from one lower corner to the opposite upper corner, and the other between the two remaining corners. The string creates an X across the opening, and both pieces should just touch at the point where they cross. If there’s a gap, your opening is twisted which will need to be taken into account when fitting your new French doors. Check the second string on both sides of the first string, as the gap may only be apparent from one side.

Also check that the floor is level. If not, you’ll have to insert packers to ensure that the frame is entirely level when you fit it. Time and care taken at this stage will make life easier and quicker later on in the installation process.

If you’ve removed any mouldings or architraves which you want to reattach at the end of the project, make sure you number and label all the parts to allow for quick and easy replacement.

Step Two – Prepare The Space

Most French door kits come as a complete system, with doors already hung in the frame. This means that the fitting should be fairly straightforward once you’ve prepared your opening. Make sure nothing remains of the old patio doors and frames and that the brickwork is secure. Then seal round the whole opening with a suitable sealant, or caulk for outdoor use which should waterproof the whole area. Check the packaging so that you know how long to leave it to dry. Then add any 2x4” wooden boards needed to cover excess space if your new doors are not quite the same size as your opening.

Step Three – Install The New French Doors

Centre your new doors into the gap. This is where you will need your assistants to help as the frame and doors are heavy. Slide them into the threshold bottom first, gently tapping the top of the frame slightly with the rubber mallet to get it firmly into the opening.

Now is the time to ensure the whole installation is plumb. Take your time over this, as once fixed in place, you won’t want to take it out and start all over the again if you find the doors don’t open smoothly or don’t fit together evenly. Gently tap in wedged packers or spacers to ensure the frame is entirely level, and measure as many times as required to get this completely accurate. Check that the doors open and close properly.

Only when you are entirely satisfied that all is correct should you follow the manufacturer’s instructions to secure the door in place with the supplied fixings.

Step Four – Finish The Doors

Seal all around the edges of the frame to ensure insulation, filling any gaps around the wedged packers you may have used to create a plumb and straight fitting. Use waterproof sealant suitable for outdoor use. Replace any mouldings or architraves if you saved these from the old door opening. Attach any door furniture if not already in place.

We hope this has given you all the tools you need to install your external french doors! If this is your first set of french doors, we have some helpful tips on how to adapt to your new external french doors including how to make them more child and animal friendly. 

If you have any questions about any of our external doors, our team is here to help so get in touch today.

In Summary

By now you’ll have realised that installing French doors isn’t suitable for a DIY beginner, but if you have a reasonable amount of experience and a lot of patience, it is not an impossible job for a competent and confident home handyperson. You will need determination and persistence to measure and adjust again and again to ensure the perfect fit in a perfectly square opening if you’re going to avoid a sloppy installation, but it will all be worth it when you’re enjoying the view through your beautiful new French doors.

If you've not made your mind up, check out our range of bifold doors too!

Further Questions

Can you install external French doors yourself?

It is possible to install a set of French doors yourself, but you will need to get them signed off by a professional to meet building regulations. For this reason, most people choose to get their doors fitted by a registered professional, so that they can make sure the doors are compliant with building regulations when it comes to thermal efficiency and security.

How much does it cost to have French doors installed?

For a straight swap, most professionals will charge around £150-£200 to fit French doors. This is equivalent to a standard day rate, though the exact price will depend on a lot of factors - including the area you live in!

This is because the job should be done within a day. If the task gets more complicated for any reason (if the opening needs adjusting for example) it can take longer and in turn, cost more.

How do you seal a French door threshold?

The beauty of buying a pre-hung French door is that the threshold of your door is already fitted in place. Once you have fitted the frame and sealed that using caulk or silicone, you do not need to worry about making any more adjustments to the door as it should already be water tight.

PAGE: /article.php

page: article

style:

Why Choose Us

Reasons to shop
with us

Specialist suppliers of high quality, internal and external folding and french doors. Buy direct for the best price.

Delivery

Nationwide
Delivery

Delivery to most mainland UK postcodes within 3-7 working days. Free delivery on orders over £750.

Easy Payment

The Climadoor
Guarantee Promise

All of our doors and hardware are guaranteed for ten years against the occurrence of manufacturing faults.

Payment Logos